C-COM Satellite Systems Inc.
iNetVu™ 7710 Controller User Manual
101
Modem Delay
The user may increase the delay time when polling for modem signal by adjusting this number.
Increasing this number, will increase the time to find and lock on to satellite as it slows down
controller activity and allows slower modems to catch up.
IP Address
This area is reserved for the modem IP address.
Automatic TX Disable (Available with All Modem Services)
This option feature will appear under all existing modem services, if this option is selected (by
default its checked), the controller will automatically disable the transmitter (TX) after the
communication between the modem and controller is re-established due to controller or modem
communication failure during transmission because of one or both devices rebooting, power
outage or any other cause of communication drop. TX will be disabled only after communication
is re-established. To Leave the TX enabled after communication is re-established uncheck this
option.
TX Polarity Reversed
This feature is available for all Ka modem types. The TX polarity can be reversed from within
the software to validate polarity configuration without changing anything on the hardware. This
feature is enabled by default on the Jupiter Ka service only, other Ka services will require the
operator to enable it.
HNS_Ku Modem Options:
The Hughes modems will have the
frequency, symbol rate, polarization, etc… to be read
automatically from the modem. These settings must match the controller side configuration for
the modem to successfully lock and stay connected on satellite after TX is enabled. System
peaks on modem signal even if search method is DVB.