C-COM Satellite Systems Inc.
iNetVu™ 7710 Controller User Manual
49
1
– Elevation Offset
The Elevation Offset is specific to each type of platform. The user may set the offset with the
range of 0º-120º, although altering this number from its default value may give an inaccurate
offset reading. This should not be tampered with without first consulting a C-COM Technical
Support Representative.
7.10.4.
AZ
The AZ menu allows configuration of compass offset.
1
– Compass Offset
A fixed offset could be used to adjust the compass heading. This value would be added to the
calculated compass heading to compensate for any consistent inaccuracy of the compass
reading.
7.10.5.
PL
The PL menu allows for the configuration of the polarization axis.
1 - Polarization Offset
By default, this polarization-offset value is set to +0°. If there happens to be a requirement for a
polarization offset in the satellite position, the user may manually enter this value in this area.
This area is also updated automatically if the skew adjustment procedure recognizes inaccuracy
in the target polarization angle. Misconfiguring this field will result in undesirable results.
O
– Indicates a PL offset is allowable and the value is displayed
N
– Indicates PL is disabled or not applicable
CP_O: +00
1
O: +00.0
1
