C-COM Satellite Systems Inc.
iNetVu™ 7710 Controller User Manual
55
1
–
iNetVu
®
7710
Controller’s IP Address
2
– Modem IP Address
7.10.12.
SR
This menu will allow the user to configure the controller to the service used (select modem type)
for 2-way satellite communication.
Fig. 44:
SR (Service) Configuration
1
– Two-Way Mobile Service Selection
Before communication is established with the modem, the user must define the service in use. The
iNetVu
®
7710 Controller supports several services, including:
iDirect
– iDirect
Service
Tooway
– Viasat
Tooway Ka Service
VA_SB2
–
Viasat
SurfBeam2 Ka service
HNS_KU
– Hughes
Ku Service
HNS_KA
– Hughes
Ka Service
HNS_JT
– Hughes Jupiter
Service on HT series modems
COMTCH
– Comtech
Service
IPstar
– IPstar
Service
GILAT
– Gilat
Service
on SkyEdge
NEWTEC
– Newtec
Ku service (OpenAMIP)
NV_SAT
– NovelSat
Service
DATUM7
– Datum
Service
STM
– STM Satlink
service
NA
- Stand Alone service - Used to locate and lock onto a manually configured satellite using the
DVB receiver unit inside of the controller independent of the modem. The manual configuration
requires:
▪
Orbital Slot of Satellite
▪
Receive Polarization
▪
DVB Type
▪
L-Band or Ku-Band Rx Frequency (kHz)
▪
Symbol Rate (ksps)
▪
FEC Code Rate
HNS_KU
– TYPICAL - HT--0
YE(Y)NN
1
2
3
5
6
7
4
