C-COM Satellite Systems Inc.
iNetVu™ 7710 Controller User Manual
120
9. iNetVu
®
7710 Series Controller Web Interface
The New revamped WEB Interface, has been improved both in looks and functionality. The user
can monitor real-time system parameters such as Signal Strength, GPS Coordinates, motor
currents, as well as allowing the user the capability of manually moving the antenna just to
mention a few of the available functions.
The
Web Interface
is similar to the 7710 Application Software, the difference being that it is
accessed through a web browser by entering the controllers IP (i.e. 192.168.0.2 default)
address in the URL address bar once a network connection has been established between the
controller and the PC.
9.1.
WEB NAVIGATING MENUS
To view the web interface, type in the IP address of the 7710 Controller in the web browser.
The options are organized in four groups after entering password and login in: Controls,
Configure, Misc. and Sign in (Authentication).
CONTROLS
•
AUTOMATIC
– Provides system status, real time search parameters and the Search and
Stow functions.
•
MANUA
L
– Enables user to manually move the platform and provide real time angle
reading.
•
COMPASS
– Provides Compass status and functionality to restore, test, calibrate and
Check compass.
•
MAINTENANCE
– Firmware updating, and Log File downloading are key features on this
window, restore settings and reset controller are the other opens.
•
PLATFORM TESTING
– Allows testing on all three axes, for a specified angle range.
CONFIGURE
•
CONTROLLER
– Configuration of controller IP, GPS, Operation Mode and Multiple
Satellite Search.
•
BEAM
– Allows the configuration of Beams, Satellite Search and Advanced Search
Parameters.
•
MODEM
– Provides same functionality as in the Application.
•
PLATFORM
– Provides Platform configuration settings.
