C-COM Satellite Systems Inc.
iNetVu™ 7710 Controller User Manual
47
7.10.1.
SAT (CONF)
This menu allows for the configuration of the target satellite(s) and the reference satellite.
Fig. 36:
Target Satellites display
1
– Multiple Satellite Search
This feature when enabled will allow the search to be carried out on three listed target satellites. The
search will automatically switch to the next listed target if the previous target search fails. Once all three
have been toggled thru at least once without a lock, the search will stop.
D
– Disabled
E
– Enabled
When Multiple Satellite Search feature is enabled the three Target Search Satellites will be displayed.
2
– Target Satellite
Satellite Beam ID and orbital slot/Longitude of the satellite. The
Find Satellite
command will use this
beam information that is configured under the Satellite and DVB Transponder Settings when attempting
to find and lock onto the satellite signal. Only Hughes modem type will display info all others will display
NA
7.10.2.
MDM
Fig. 37:
Modem Configuration
MSS:D BM01_072.0W
2
1
B 01 091. 0W S2A
1468.0 50000
VV D
1
5
6
4
7
2
3
MSS:E BM01_072.0W
BM02_087.0W BM03_091.0W
