C-COM Satellite Systems Inc.
iNetVu™ 7710 Controller User Manual
38
3
– Displays the status of the (RX) Satellite receiver receive state
4
– ACP status enables or disables the ACP routine after locking on signal
D
- Disables the ACP after locking on signal
E
- Enables the ACP after locking on signal in which an isolation value is displayed after
successfully passing the 2 tests.
A_ST ACP has started.
A_SP ACP has passed.
5
– Beacon Receiver Frequency and Signal Strength
The Beacon Receiver is an optional unit that could be used to acquire satellite with the 7710 Controller.
See “iNetVu User Manual – Beacon Receiver” for details.
7.7.11.
IP
This menu displays the IP address of the user configured iNetVu
®
7710 Controller and Modem.
Ensure the IP address of the modem configured is the actual IP address of the modem, and that
the 7710 Controller is operating on the same network as the modem.
Fig. 27:
“IP” (Controller and Modem IP) Display
1
– C_IP: iNetVu
®
7710 Controller’s IP Address – Default 192.168.0.2.
2
– M_IP: The Modem IP configured in the 7710 Controller
GW
1
– S_IP (iNetVu
®
7710
Controller’s Subnet Mask IP Address – Default 255.255.255.0)
2
– Gateway IP Address (Default: 192.168.0.32 or 192.168.100.32 depends on Modem
Type/Service)
C_IP : 70.232.247.50
M_IP: 70.232.247.49
1
2
S_IP : 255.255.255.0
G_IP: 70.232.247.49
1
2
