Safety
Butzbach GmbH Industrietore
Original operating manual sliding doors_V1
13/01/2021
3
2
Safety
2.1
Intended use
The sliding door system is intended as a installation to pass through, primarily in the industrial sector and, for
example, at airports, airfields and similar facilities.
2.2
Improper use
2.3
Safety information for the system
The following safety notices are attached to the system, which must be strictly followed:
Warning! Danger in the case of improper use!
Improper use of the door system can lead to dangerous situations.
In its standard version, the system is not intended for the following uses:
Use in an environment at risk of explosions
Use in areas where fire protection regulations apply
Use of the motor to drive or control third party devices
Use in areas where children or unauthorised individuals have access to the operation
Use with accessories and replacement parts that are not inspected and approved by Butzbach
GmbH Industrietore
Use without or with non-working safety devices
Danger! Mortal danger due to electric shock!
When opening the control cabinet / the power supply box / the door control system, there is line voltage
present! Mortal danger!
Disconnect the control system from the electrical network (main switch) before you open the
control cabinet or the power supply box! Line voltage is present. Mortal danger!
Work on electrical components should only be performed by a qualified electrician.
When working on electrical components, the qualified electrician must adhere to the five rules of
safety (BGUV Regulation 3) and the relevant VDE regulations.
The system must be securely disconnected from the electrical network during all installation work!
