Maintenance and inspection
Butzbach GmbH Industrietore
Originalbedienungsanleitung SPACELITE_V1
24/02/2021
32
9
Maintenance and inspection
This chapter shall make the system user and authorised system personnel familiar with the proper
maintenance and the basics for proper testing and inspection of the door system in conformance with
guidelines.
When maintaining and inspecting the door system, the safety information and warnings in chapters 2 Safety
and 3 Other dangers must absolutely be followed!
9.1
Basics for testing power-operated doors
9.1.1 Safety requirements
The safety requirements for power-operated doors are regulated in the following regulations:
2006/42/EC Machinery directive
2004/108 EC EMC directive
ASR A1.7 Technical rules for doors in workplaces
DIN EN 13241-1 Product standards for doors part 1: products without fire and smoke protection
properties
Regulation 305/2011 on the marketing of construction products
9.1.2 Annual testing / Technical rule ASR A1.7
According to section 10.2 of the Technical Rule for Doors in Workplaces ASR A1.7, power-operated doors
must be tested by a qualified professional before first being put into service and at least once annually. This
testing should not be equated with maintenance.
ASR A1.7 requires that the annual testing is performed by a qualified individual. The corresponding expert
knowledge of the people tasked with this guarantees that the system is tested properly.
Evidence of the testing should be kept, which is to be continuously posted to the test book.
9.1.3 Qualified individual
Qualified individuals are people that possess sufficient knowledge in the area of power-operated doors based
on their professional training and experience, and they are familiar enough with all applicable national work
protection regulations, accident prevention regulations, guidelines and generally accepted technical rules
Note! Maintenance work!
The maintenance work on the system should fundamentally only be performed by authorised service
personnel of Butzbach GmbH Industrietore.
The authorised service personnel have a service and maintenance manual.
However, the maintenance and inspection activities described in section 9.2.1 can be performed
by
authorised operating personnel
.
The following section should support you in performing such activities.
