5
CAT
Quick installation and programming guide
English
WARNING
This quick guide is a summary of the complete installation manual. The manual contains safety warnings and
other explanations which must be taken into account. The most recent versions of this guide and the
installation manual are available at the "Downloads" section on Erreka's website.
http://www.erreka-automation.com
The options and functions described in this guide apply for the firmware version indicated on the circuit. The
firmware, as part of a process of continuous improvement, is subject to new functionalities or upgrades being
included as a result of new versions which are not necessarily compatible with previous ones. For this reason,
some options or functions may differ or be unavailable if your firmware is older than shown in this guide.
90º
90º
D287A
90
135
200,5
130
200
FCC
FCA
E287C
Assembly levels (mm)
Manual operation
Motorised operation locking:
•
Proceed in reverse order to release.
•
Move the gate manually to interlock it in the operator
mechanism.
E287D
Elements of the complete installation
Unlocking for manual operation:
•
Insert the key (1) and turn clockwise about 90º, without
forcing it.
•
Pull the release lever (2) until it is about 90º, without forcing it.
Electrical wiring
A:
Main power supply
B:
Flashing light
C:
Photocells (Tx / Rx)
D:
Pushbutton/wall key
MS
M-048/00
Firmw
a
re V1.0 or later
