Burstner I 690 G, Instruction Manual, Page: 34 / 304

34
I-Modell - 13/14 - Ausgabe 08/13 - 2354644 - BUE-0056-07EN
Before the journey
3
The vehicles have an electrically extendable entrance step.
Before stepping on the entrance step, fully extend it (Fig. 10).
Extending:
„
Press the rocker button (Fig. 11,1) down and hold it pressed (at least
3 seconds) until the entrance step has extended completely.
Retracting:
„
Press the rocker button (Fig. 11,1) up until the entrance step has retracted
completely.
When the ignition is switched on and the entrance step is extended, an indi-
cator lamp (Fig. 12,1) is illuminated on the dashboard.
3.7 TV unit (special equipment)
Z
The button to operate the entrance step is located on the inside of the
vehicle in the area of the conversion door.
Z
If the entrance step is not retracted and locked in place correctly, a red indi-
cator lamp lights up on the dashboard when the ignition is switched on.
Z
Follow the warning notice on the entrance step.
Fig. 10 Warning notice for entrance
step
Fig. 11 Operating button for entrance
step
Fig. 12 Indicator lamp
X
Before commencing the journey, place and secure the flat screen and
screen support in the initial position. If the screen holder is installed in a
TV cabinet: Close TV cabinet.
X
Before commencing the journey, ensure that the antenna is in park posi-
tion. Danger of accidents! Park position means: The antenna points
towards the back, is fully lowered and is locked in this position.