Burstner I 690 G Page 238 Instruction Manual Download

Page: 238 / 304

238

I-Modell - 13/14 - Ausgabe 08/13 - 2354644 - BUE-0056-07EN

Maintenance

12.8.2

Front lights (Viseo)

Low beam/main beam

The bulbs are changed in the engine compartment.

Open bonnet (see chapter 4).

Put your hand behind the lamp holder (Fig. 259,1).

Turn the lamp holder with the lamp in an anticlockwise direction and
remove.

Turn bulb in an anticlockwise direction and remove from the holder.

Put in a new bulb.

Daytime running light

The lights have LEDs. To change the LEDs, contact an authorised dealer or a
service centre.

Direction indicator

The bulbs are changed in the engine compartment.

Open bonnet (see chapter 4).

Put your hand behind the lamp holder (Fig. 260,1).

Fig. 262 Front lights

1 Fog light

2 Daytime running light (LED)

3 Direction indicator

4 Main beam/low beam

Fig. 263 Low beam/main beam/parking

light

Fig. 264 Direction indicator

Summary of Contents for I 690 G

















































































































































































































































































































Search results

Summary of Contents for I 690 G

Reviews:

Related manuals for I 690 G

Brands by name

Popular brands

Burstner I 690 G, Instruction Manual

Search results

Summary of Contents for I 690 G

Reviews:

Related manuals for I 690 G

Brands by name

Popular brands