Burstner I 690 G, Instruction Manual

Page: 103 / 304

103
I-Modell - 13/14 - Ausgabe 08/13 - 2354644 - BUE-0056-07EN
Living
6
Adjusting the seat:
„
Sit on the seat (Fig. 121,1).
„
Turn and swing the release point (Fig. 121,3).
„
Whilst still sitting, pull the seat out forwards to the desired position. Release
the release point.
Adjusting the neck cushion:
„
Hold the neck cushion (Fig. 121,2) and carefully fold it downwards.
„
Push the seat cushion slightly inwards in the area around the metal clip
(Fig. 122,1).
6.13 Beds
6.13.1 Bunk bed
Depending on the model, the vehicle is fitted with a bunk bed. The bunk bed
can be used immediately, without additional conversion.
Always use the access ladder provided to climb up to the top bed.
6.13.2 Pull-down bed, manually operated
Fig. 121 Adjusting the seat Fig. 122 Adjusting the neck cushion
X
Always use the safety guards supplied.
X
Never remove or dismantle the safety guards supplied.
X
If access aids (e.g. foldable steps) are provided, always use these
access aids when climbing into and out of the bed.
X
Only use the upper bunk bed if the safety guard is fitted.
X
The maximum permitted bunk bed load is 100 kg.
X
The upper bunk bed must not be used by children under 6 years of age.
X
Never allow small children to remain in the bunk bed without supervision.
X
But in particular with regard to small children less than 6 years of age,
users should ensure that they cannot fall out of the bunk bed.
X
Use separate children's beds or travel cots suitable for children.
X
Switch off the reading lamps in the pull-down bed before the bed is
pushed up. Fire hazard!
X
Switch off the reading lamps on the underside of the pull-down bed when
the bed is lowered. Fire hazard!
X
The maximum permitted pull-down bed load is 200 kg.