Burstner I 690 G, Instruction Manual

Page: 104 / 304

104
I-Modell - 13/14 - Ausgabe 08/13 - 2354644 - BUE-0056-07EN
Living
6
The pull-down bed is located in the driver's cabin above the seats.
Lowering the pull-down bed:
„
Switch off the lamps underneath the pull-down bed.
„
Rotate the driver's and front passenger's seats in the direction of travel,
lock in position, push completely forwards and turn the backrest as far back
as possible.
„
Close the shade in the driver's cabin.
„
Press the release knob (Fig. 123,1) or pull out the release plate (Fig. 124,1)
at the bottom. The lock is released.
„
With both hands, pull the pull-down bed down as far as it will go.
„
Make sure that the pull-down bed is in the lower end position and is not
resting on obstacles such as headrests or cushions.
Lifting the pull-down bed:
„
Switch off the lamps in the pull-down bed.
„
Use both hands to push pull-down bed upwards as far as it will go. When
doing this, ensure that the snap latch engages audibly in the locking
bracket.
„
Check that the pull-down bed is locked correctly. To do this, pull down the
pull-down bed firmly.
X
Before commencing the journey, secure the pull-down bed. To do this,
lock the pull-down bed.
X
Before use, pull the pull-down bed into the lower end position. Ensure
that the pull-down bed is not resting on obstacles such as headrests,
cushions or similar.
X
If there is a safety net: Only use the pull-down bed, if the safety net is set
up.
X
Never allow small children to remain in the pull-down bed without super-
vision.
X
But in particular with regard to small children less than 6 years of age,
users should ensure that they cannot fall out of the pull-down bed.
X
Use separate children's beds or travel cots suitable for children.
Z
You must be able to close the pull-down bed without any great effort, so
that there is no tension in the locking position. Objects on the pull-down bed
can distort the lifting mechanism on one side, resulting in damage.
Fig. 123 Release point (Aviano) Fig. 124 Release point (Viseo)
Z
When closing the pull-down bed, pull the side fabric panels inwards. This
prevents the fabric from getting trapped in the lock of the pull-down bed.