Burstner I 690 G, Instruction Manual, Page: 217 / 304

217
I-Modell - 13/14 - Ausgabe 08/13 - 2354644 - BUE-0056-07EN
Sanitary fittings
10
10.7.4 Toilet (Dometic)
The flushing of the toilet is fed directly from the water system of the vehicle.
The toilet seat can be rotated into the required position.
Let some water run into the toilet bowl before using the toilet. In order to do so
press the flush button (Fig. 250,3) on the control and operating unit
(Fig. 249,2).
Flushing:
„
Before flushing open the sliding trap of the toilet. For this pull out the slide
lever (Fig. 249,1).
„
For flushing, press the flush button (Fig. 250,3).
„
After flushing close the sliding trap. To do so, push the slide lever back.
The indicator lamp (Fig. 250,2) goes on whenever the sewage tank is filled up
to 3/4.
The indicator lamp (Fig. 250,1) goes on whenever the sewage tank has to be
emptied.
The indicator lamp (Fig. 250,4) lights up whenever the sewage tank is with-
drawn.
Fig. 249 Toilet bowl with control and
operating unit
Fig. 250 Control and operating unit
toilet