Burstner I 690 G, Instruction Manual

Page: 251 / 304

251
I-Modell - 13/14 - Ausgabe 08/13 - 2354644 - BUE-0056-07EN
Wheels and tyres
13
„
Pull the spare wheel out from under the vehicle as far as possible.
„
Release the securing bracket and the wing nuts of the spare wheel support.
„
Remove the spare wheel.
13.6.2 Spare wheel support under the vehicle (basket)
Removing the spare wheel:
„
Loosen the nuts (Fig. 279,1) on the right and left rear hooks (Fig. 279,2) of
the spare wheel support.
„
Unscrew the wheel nuts approx. 3 to 4 cm.
„
Pull the bar (Fig. 279,3) slightly upwards. At the same time, pull down the
hooks and unhook the bar.
„
Take down the basket and remove the spare wheel.
13.6.3 Spare wheel support in the rear garage
Removing the spare wheel:
„
Open external flap of the rear garage.
„
Loosen and remove both fixing screws (Fig. 280,2) with the on-board tool
set.
„
Remove the spare wheel (Fig. 280,1) from the support (Fig. 280,3).
Z
When securing the spare wheel, the inside part of the rim must point
upwards. Tighten wing nut and secure it with splint.
Z
Turn the crank until the retaining rope has been totally wound up, and the
spare wheel fits tightly in the holder.
X
Due to its weight and fitted position, the spare wheel can be raised or
lowered by a very strong person only. Always get a second person to
assist.
Fig. 279 Spare wheel support (basket)
Fig. 280 Spare wheel support in the rear
garage