Burstner I 690 G Instruction Manual Download

Page: 236 / 304

236

I-Modell - 13/14 - Ausgabe 08/13 - 2354644 - BUE-0056-07EN

Maintenance

12.8.1

Front lights (Aviano, Elegance, Grand Panorama)

Low beam/main beam

The bulbs are changed in the engine compartment.

Open bonnet (see chapter 4).

Put your hand behind the lamp holder (Fig. 259,1).

Turn the lamp holder with the lamp in an anticlockwise direction and
remove.

Turn bulb in an anticlockwise direction and remove from the holder.

Put in a new bulb.

Cylindrical bulbs

To remove and to insert, carefully bend the
contacts of the lamp holder outwards

Halogen bulb

To remove, release retaining springs

After inserting, hook the retaining springs
again

Fig. 258 Front lights

1 Fog light

2 Daytime running light (LED)

3 Direction indicator

4 Low beam/main beam

Pos. in

Fig. 257

Fixture type/bulb
type

Changing

Fig. 259 Low beam/main beam/parking

light

Summary of Contents for I 690 G

















































































































































































































































































































Search results

Summary of Contents for I 690 G

Reviews:

Related manuals for I 690 G

Brands by name

Popular brands

Burstner I 690 G, Instruction Manual

Search results

Summary of Contents for I 690 G

Reviews:

Related manuals for I 690 G

Brands by name

Popular brands