Burstner I 690 G Page 237 Instruction Manual Download

Page: 237 / 304

237

I-Modell - 13/14 - Ausgabe 08/13 - 2354644 - BUE-0056-07EN

Maintenance

Direction indicator

The bulbs are changed in the engine compartment.

Open bonnet (see chapter 4).

Put your hand behind the lamp holder (Fig. 260,1).

Turn the lamp holder with the lamp in an anticlockwise direction and
remove.

Remove bulb.

Put in a new bulb.

Reassemble the direction indicator in the reverse order.

Daytime running light

The lights have LEDs. To change the LEDs, contact an authorised dealer or a
service centre.

Fog light

The bulbs are changed in the engine compartment.

Open bonnet (see chapter 4).

Put your hand behind the fog light and remove rubber cap (Fig. 261,1) from
lamp housing.

Press metal clip (Fig. 261,2) together and release from holder.

Remove bulb (Fig. 261,3) with cable from lamp housing.

Put in a new bulb.

Reassemble the lamp in the reverse order.

Fig. 260 Direction indicator

Fig. 261 Fog light

Summary of Contents for I 690 G

















































































































































































































































































































Search results

Summary of Contents for I 690 G

Reviews:

Related manuals for I 690 G

Brands by name

Popular brands

Burstner I 690 G, Instruction Manual

Search results

Summary of Contents for I 690 G

Reviews:

Related manuals for I 690 G

Brands by name

Popular brands