69
of 216
6.2 Program selection
In the "Program selection" menu (M82) you can select the measurement program number and give the
program a name.
Program number selection
Select the measurement program for which you wish to make specific settings.
When you enter the configuration level, the DIGIFORCE
®
9311 always presents the currently active
measurement program.
Naming the program
Specify a name for the selected measurement program. You can enter this program name in the "Enter
program name" dialog box. You can enter up to 20 alphanumeric characters and/or special characters.
1
To open the "Program selection" menu from measurement mode, tap anywhere on the
touchscreen. The icon appears in the bottom-right corner.
2
Tap to open the "Configuration Main Menu".
3
Tap the "Program Select" icon.
4
Enable the radio button for the program number that you wish to select.
5
Tap
[Program X]
for the selected program number to change the program name.
6
Use the keypad to enter your required program name and confirm with
[OK]
.
7
Tap to return to the "Configuration Main Menu" menu.
Note:
You can choose to display the icon permanently in measurement mode. For further details,
please see section 6.1.1 "Function key definition" on page 44.
Summary of Contents for DIGIFORCE 9311
Page 3: ...3of 216...