Burster DIGIFORCE 9311, Operation Manual, Page: 123 / 216

123
of 216
Parameters in the "Trapezoid window configuration" menu (M13)
Number
1 or 2 Choice of trapezoid window 1 or 2
Window On / Off Enable/disable
Type Trapezoid X, Trapezoid Y Select the trapezoid type
Curve segment Forward, Return, Complete
curve
Specify the curve segment for which the
trapezoid window is active.
Trapezoid of type X
Xmin <value input> Trapezoid position coordinate Xmin
Xmax <value input> Trapezoid position coordinate Xmax
YminLe
<value input> Trapezoid position coordinate Ymin Left
YminRi <value input> Trapezoid position coordinate Ymin Right
YmaxLe <value input> Trapezoid position coordinate Ymax Left
YmaxRi <value input> Trapezoid position coordinate Ymax Right
Entry
Left, Right
Side at which the curve enters the X trapezoid
Possible options:
• one entry side
• more than one entry side
• no entry
Exit Left, Right Side at which the curve exits the X trapezoid
Possible options:
• one exit side
• more than one exit side
• no exit
Trapezoid of type Y
Ymin
<value input> Trapezoid position coordinate Ymin
Ymax <value input> Trapezoid position coordinate Ymax
XminBo <value input> Trapezoid position coordinate Xmin Bottom
XminTo <value input> Trapezoid position coordinate Xmin Top
XmaxBo
<value input> Trapezoid position coordinate Xmax Bottom
XmaxTo <value input> Trapezoid position coordinate Xmax Top
Entry Bottom, Top
Side at which the curve enters the Y trapezoid
Possible options:
• one entry side
• more than one entry side
• no entry