114
of 216
specified time has elapsed.
Number of readings:
The measurement is stopped once the specified
number of measurement-value pairs has been
recorded.
X / Y stop value;
Number of
readings
---- / <value input>
Set here the stop-condition threshold if an internal
stop mode is selected. Alternatively, if "No.of
readings" is selected as the stop event, specify
here the number of readings. Use the keypad to
enter the value.
Timeout
<value input>
Range:
0.0001 < t
imeout ≤ 99999
seconds
The timeout function for stopping the
measurement is always active. You therefore
need to enter a suitable time value.
IMPORTANT:
The timeout function for stopping the measurement is always active, i.e. even in the
"External" stop mode. You therefore always need to enter a suitable time value.
Summary of Contents for DIGIFORCE 9311
Page 3: ...3of 216...