155
of 216
6.3.5.6 Graphical Test Operation – Generating an envelope
In the "Graphical test operation" menu (M59) you can generate the "Envelope" graphical evaluation
element. To do this, you need to run at least one measurement. When generating the envelope, all the
measurements available in the curve memory (up to 10 measurement curves) are used as the basis for
the calculation.
Note:
In the "Graphical test operation" menu (M59) you can use
[CrvArray]
to display the set of
curves for the available measurements. You can then delete from the memory any individual
measurement curves that you do not want to be used for calculating the envelope. When
starting the envelope generation process it makes sense to delete old measurement curves.
Diagram 68: Graphical Test Operation – Envelope
1
In measurement mode, tap anywhere on the touchscreen. The icon appears in the
bottom-right corner.
2
Tap to open the "Configuration Main Menu".
3
Tap the "Program Setup" icon.
4
Tap the "Graph. TestOp." icon.
5
Tap
[Evaluation]
.
Summary of Contents for DIGIFORCE 9311
Page 3: ...3of 216...