Burster DIGIFORCE 9311, Operation Manual, Page: 181 / 216

181
of 216
1
In measurement mode, tap anywhere on the touchscreen. The icon appears in the
bottom-right corner.
2 Tap to open the "Configuration Main Menu".
3 Tap the "Curve Analysis" icon.
4 Tap [Single] or [Curve arr] to display a
single measurement curve or a set of curves
(curve array).
5 You can use these buttons to show/hide the
curve array.
6
Swipe the touchscreen to switch
between the available measurement curves.
7 Tap to return to the "Configuration Main Menu" menu.