165
of 216
6.3.6 Numerical test operation
In the "Numerical test operation" menu (M58) you can retrieve the live sensor values from the active
measurement channels X and Y and retrieve the status of the PLC control signals (inputs and outputs).
You can also tare each measurement channel separately (the tare function is not available for the
optional piezoelectric input).
You can stimulate the PLC outputs manually in order to test the cable to the connected PLC. The PLC
signals can also be viewed/set under Fieldbus communication.
Note:
If the PLC sets the "IN_AUTO" control input, the "Numerical test operation" menu (M58) will
close automatically and the DIGIFORCE
®
9311 will switch to measurement mode.
Diagram 71: Numerical test operation
1
In measurement mode, tap anywhere on the touchscreen. The icon appears in the
bottom-right corner.
2
Tap to open the "Configuration Main Menu".
3
Tap the "Program Setup" icon.
4
Tap the "Num. TestOp." icon.
5
Tap to return to the "Program Setup" menu.
Summary of Contents for DIGIFORCE 9311
Page 3: ...3of 216...