186
of 216
7
Measurement results display - Measurement
mode
Note:
In the "Basic setup" menu (M18), you can change the function-key assignments and the display
preferences for each of the measurement menus.
The DIGIFORCE
®
9311 starts automatically in measurement mode at power-up. In this operating mode,
the DIGIFORCE
®
9311 can perform measurements and display the resultant measurement curve and/or
a range of results data and statistics. The DIGIFORCE
®
9311 uses 7 different views ("Measurement
menus") for this purpose, which you can scroll through by swiping
the touchscreen.
All the measurement menus contain the global header, the individual evaluation status of the last
completed measurement (on the right) and the footer displaying the function keys
[F1]
to
[F3]
with their
associated function (for more information about the function keys, please see section 6.1.1 "Function key
definition" on page 44). Tapping takes you from measurement mode to the "Configuration Main Menu"
(M7). You can choose to have the function keys and the icon displayed permanently or temporarily in
measurement mode.
Note:
The PLC control signal "IN_AUTO" is used to prevent the instrument from switching to
configuration mode.
7.1 Top-level view of measurement results
Diagram 78: Top-level view of measurement results
IMPORTANT:
The PLC control signal "IN_AUTO" = 1 is used to prevent the instrument from switching
to configuration mode. This access lock is indicated by the icon.
Summary of Contents for DIGIFORCE 9311
Page 3: ...3of 216...