Burster DIGIFORCE 9311, Operation Manual, Page: 60 / 216

60
of 216
File structure - data area
The following data entry is generated for each measurement:
• Date / Time
• Overall result OK/NOK (including code of source of NOK result)
• Serial number (from the order sheet)
• Part counter
• "General curve data" dataset (2 x 7 floating point values)
• "User-defined values" dataset (up to 20 floating point values)
Date / Time Time stamp for the measurement
Format: YYYY-MM-DD hh:mm:ss;
Terminating character: semicolon ";" (0x3B hex)
Example: 2016-02-25 18:02:46;
Result Overall result of the measurement, OK/NOK, including individual results
from the graphical evaluation elements:
You can configure up to 8 graphical evaluation elements in one
measurement program. In measurement mode, the individual
evaluation results indicate the associated element (see section 7.1.4
"Individual evaluation status in measurement mode" on page 188).
Each of these 8 items is given a value in the *.csv file:
0 = active and evaluated as OK,
1 = active and evaluated as NOK, and
- = inactive
Terminating character: semicolon ";" (0x3B hex)
Example:
active and OK (0)
inactive (-)
inactive (-)
active and NOK (1)
inactive (-)
active and OK (0)
active and OK (0)
active and NOK (1)
OK (0--0-000); : OK measurement (W1, Tr1, Th1, EN active and OK)
NOK (0--1-001); : NOK measurement (Tr1 and EN are source of NOK)
Serial number This entry is obtained from "SN1" on the order sheet.
Note:
Information can be entered in the order sheet via the Fieldbus
interfaces.
Terminating character: semicolon ";" (0x3B hex)