169
of 216
6.3.6.3 Numerical Test Operation - PLC signals
You can retrieve the live states of the PLC inputs and outputs in the "Numerical test operation" menu
(M58), and also set/reset the PLC outputs. You can also use this function when the instrument is
controlled via the Fieldbus option (e.g. PROFIBUS or PROFINET). In this case, the corresponding signals
are displayed and set/reset.
Note:
Note that on activating the "IN_AUTO" control input, the "Numerical test operation" menu (M58)
will close automatically and the DIGIFORCE
®
9311 will switch to measurement mode.
Diagram 74: Numerical Test Operation - PLC signals
1
In measurement mode, tap anywhere on the touchscreen. The icon appears in the
bottom-right corner.
2
Tap to open the "Configuration Main Menu".
3
Tap the "Program Setup" icon.
4
Tap the "Num. TestOp." icon.
5
Tap
[<<]
or
[>>]
to select the PLC output you
require.
Summary of Contents for DIGIFORCE 9311
Page 3: ...3of 216...