Burg Wächter KSC-USB-NET, User Manual, Page: 97 / 188

91
4.3.3.4 Signal Tour
Signal tour supports tour among multiple signals in one window.
Note:
You must set signal group in Favorites, see Ch 4.5.5.3.
Step 1. Select window to tour signal.
Step 2. In Signal Group>Favorites, select one signal group, hold left key of mouse to drag the
signal group to target window. The window will start to tour automatically.
Step 3. Click . See Figure 4-9.
Figure 4-9
Step 4. Set stay time and stream type.
Note:
Click of a certain signal, so this signal will not be shown in tour list, but stil exists in
signal groupl.
Set validity time.
Click in the upper right corner stop signal tour.
4.3.4 Scheme
Scheme is plan of TV wall, including current split mode, video source info, tour setup of TV wall.
4.3.4.1 Add Scheme
Step 1. Customize window layout on screen.
Step 2. Click . See Figure 4-10.
Figure 4-10
Step 3. Enter customized scheme name.
Note:
When new scheme name overlays existing scheme, system will ask if you want to overwrite
info. If you overwrite info, the existing scheme will be replaced by new scheme.
Step 4. Click OK.