Burg Wächter KSC-USB-NET, User Manual, Page: 24 / 188

18
2 Open-Package Inspection and Wiring
2.1 Inspection Procedure
When you receive video matrix platform, please check for obvious external damage. The material
of product package should be able to protect the product from majority impacts during
transportation.
Secondly please open the package, and check all accessories see if any part is missing. You
may refer to accompanied accessory bag. After you have checked that all parts are included, you
may remove protector on device.
connection between mainboard and interface board is loose.
2.2 Accompanied Assessory Bag
please make sure all contents match the checklist.
2.3 Device Installation
At time of inserting mainboard and Function Card into chassis, please remove the protection
cover at connection interface of real panel.
Connect Ethernet port 2 on main control panel to any Ethernet port on control panel via a
cable.
In case of beep, it may be that either one of power modules is not well fixed. You may press
the small red button next to power module at the rear of device to cancel beep alarm.