RM1250 User Guide
16
Figure 2-8. RM1250 Aligned to Base
9
Secure the unit by tightening the screws. Torque the dome screws and fitting to the following
measurements:
–
dome screws - 10-12 in-lbs.
–
cord grip body - 60 in-lbs.
–
cord grip gland nut - 30 in-lbs.
I
MPORTANT
:
Do not twist the dome on the base if the cut-outs do not line up with the screws. Lift the
dome off of the adapter and replace it in the correct position.
10
Continue with Chapter 1,
Configuration
to configure the RM1250 for service.
Maintenance
If performing maintenance on the RM1250, first disconnect the equipment from hazardous voltages before
gaining access to the enclosure.
