RM1250 User Guide
12
Equipment Notes
This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D Hazardous Locations or Non-Hazardous
Locations only.
The RM1250 are intended for transmissions at a frequency of no greater than once per hour.
Installation Requirements
The RM1250 is designed for easy installation and configuration. The unit is housed in a dome enclosure and fits
onto a customized base. The dimensions of the unit dome enclosure are shown in Figure 2-3.
Figure 2-3. RM1250 Enclosure Dimensions
Before installing the unit, ensure that the area around the installation site provides enough working space to
easily access the unit to wire inputs, configure the unit for service, or perform routine maintenance.
Installation Overview
W
ARNING
:
If wires are to be buried or covered, conduit must be used to protect wires.
The following steps provide an overview of a typical installation, as well as the recommended installation
sequence.
1
Determine where to place or mount the RM1250.
2
Make connections.
3
Secure the RM1250 unit.
4
Configure RM1250 for service using Bullhorn Tools (refer to
Configuration
).
