100
•
WebAccess
•
Print Server
•
Synchronization with UPS
Failover cannot be used while using the functions below.
•
Replication
•
Sleep Timer
•
Volume encryption
•
MySQL Server
•
Media Cartridge
•
LVM volume
•
Port Trunking
•
Amazon S3
•
Surveillance Cameras
The operations below are unavailable while failover is being confi gured.
•
Initialization of settings
•
Rebooting from the Web Admin interface
•
Changing of RAID confi guration
•
Shutting down from the Web Admin interface
•
Formatting of hard drive
•
Changing settings of backup TeraStation from the Web Admin interface
•
Rebooting
•
Updating of fi rmware
Notes:
To perform any of the above operations, change to maintenance mode temporarily.
• To change to maintenance mode, in the main TeraStation's Web Admin interface, navigate to [Backup] -
next to [Failover] and click [Maintenance mode]. After the operation is completed, click [Cancel maintenance
mode].
• If failover is configured, change to maintenance mode before updating the firmware on the TeraStation.
• The settings for the backup TeraStation cannot be changed even if it is in maintenance mode.
Ethernet cable connection methods:
Use of the confi gurations below is recommended when making connections with Ethernet cables.
Use fi xed IP addresses. Because the IP address of the TeraStation designated as the backup cannot be changed, set the IP
address before confi guring failover.
