213
Exit
Exit iSCSI Hard Disk Connection Tool.
Note:
If your computer is connected to many volumes on a TeraStation, it may take some time for the utility to detect all
the volumes. For example, it takes about 20 minutes for a computer to detect 32 connected volumes from a single
TeraStation. This time may vary depending on your computer and network. Volumes are detected successively, so
please wait until all volumes are detected before making changes in the utility. Also, use the iSCSI initiator supplied
with Windows 7, Windows Vista, or Windows Server 2008.
Menu
Name
Description
File
Refresh
Search the TeraStation within the LAN.
Exit
Finish iSCSI Hard Disk Connection Tool.
Setup
Browse Web setting
Opens the Web Admin interface of the selected TeraStation.
Change IP Address
You can change the IP address of the selected TeraStation.
Remove the registered iSCSI
Hard Disk
If you disconnect the TeraStation without unregistering it or changing its IP ad-
dress, it will take a long time to search since the registration information stays in
your computer. In such a case, unregister the old TeraStation from the [Remove
the registered iSCSI Hard Disk] screen.
Set Mutual CHAP Secret
Set the CHAP password on the computer side.
Use share folder on a Persis-
tent Volume
If TeraStation is always connected and folders are shared in the network, click
this to insert the check mark. If the checkmark is not inserted, the share will be
disconnected when the computer is restarted.
Connect some Volumes
Displays the screen to connect multiple volume at a time.
Disconnect some Volumes
Displays the screen to disconnect multiple volume at a time.
Launch Disk Management
Displays [Disk Management] screen on Windows. To use the connected TeraSta-
tion, you must reserve the volume area and format it on [Disk Management]
screen.
Help
About
Displays iSCSI hard drive version information.
