174
feature, but not both at the same time.
• On the local network, Wake on LAN packets may be sent to port 2304 on either of the TeraStation's LAN ports. If
the TeraStation is connected to a Buffalo wireless router configured for remote access, then it may be turned on
from out side the local network (from the WAN side). To use this feature, the Buffalo router must be connected to
LAN Port 1 only on the TeraStation.
• Nothing is shown on the LCD panel even if the TeraStation power was turned off by the Wake on LAN.
Wake on LAN is now confi gured.
UPS (Uninterruptible Power Supply)
If a UPS (sold separately) is attached, the TeraStation can be automatically shut down for protecting data in the event of
a power outage.
1
Plug the power cable of the UPS to a wall socket.
2
Connect the AC cable of the TeraStation to the UPS.
3
Connect the UPS and TeraStation using a USB cable or dedicated cable.
Note:
If using a USB cable, connect to the USB port on the rear side. If using a dedicated cable, connect to the dedicated
UPS port on the rear side.
4
Turn on the UPS, then the TeraStation.
5
In the TeraStation's Web Admin interface, click [Management].
6
Click
next to [UPS Sync].
7
Click
[Edit].
8
Confi gure the desired settings, then [OK].
