Buell 2007 ULYSSES, Service Manual, Page: 636 / 647

2007 Buell Ulysses: Electrical 7-73
HOME
8. Install cable and harness guide at steering head.
9. See Figure 7-87. Connect:
● Ignition switch [33].
● Auxiliary power outlet [160].
● Turn signal flasher connector [30].
●
Instrument module connector [39].
●
Left switch housing connector [24] and right switch
housing connector [22].
● Turn signal connectors [31].
●
Headlight connector [38].
●
Horn connectors [122].
● Clutch switch [95] from left switch housing.
● Front brake switch [121] from right switch housing.
● Active muffler [165].
●
O2 sensor [137].
●
Temp sensor [90]
●
Fuel injectors [84] & [85].
● Ground fastener at steering head.
10. Connect fuel line at fuel rail.
11. Install cable strap loosely around main harness (6) and
ignition switch.
12. Connect throttle position sensor [88]. See 4.37 THROT-
TLE POSITION SENSOR .
13. Connect intake air temperature sensor [89]. See 4.36
INTAKE AIR TEMPERATURE SENSOR .
14. Install connector on oil pressure switch [120]. See 3.12
OIL PRESSURE INDICATOR SWITCH .
15. Install and connect ignition coil. See 4.44 AIR CLEANER
ASSEMBLY .
16. Install starter side of positive battery cable to starter.
17. Connect starter solenoid [128].
18. Install sprocket cover wiring. See 7.26 SPROCKET
COVER WIRING .
19. Connect fan connector [97].
20. Install fan and tighten fasteners to 12-36 in-lbs (1.4-4.1
Nm). See 4.38 COOLING FAN .
21. Install rear shock absorber assembly. See 2.23 REAR
SHOCK ABSORBER .
22. Install intake cover. See 2.39 INTAKE COVER ASSEM-
BLY .
Figure 7-87. Electrical Connectors Behind Windscreen
1. Turn signal flasher connector [30]
2. Instrument cluster connector [39]
3. Right handlebar connector [22]
4. Left handlebar connector [24]
5. Turn signal connectors [31]
6. Ignition switch
7. Cable strap
8. Main harness
9. Horn fastener
10. Horn mount
11. Horn connector [122]
12. Horn
9
4
8
3
2
1
5
10
12
7
11930
6
11
5