Buell 2007 ULYSSES, Service Manual, Page: 114 / 647

2007 Buell Uylsses: Maintenance 1-41
HOME
INSTALLATION
1. See Figure 1-44. Place filter element (1) on baseplate
(2).
2. Position air cleaner cover over baseplate. Make sure air
filter remains correctly positioned.
3. Install air cleaner cover by latching six latch tabs (3) to
baseplate.
4. Position actuator cable and harness in grooves on air
cleaner cover.
5. See Figure 1-43. Position fuel vent tube (3) in groove on
top of air cleaner cover and connect to fuel vent valve (7).
Secure vent tube to vent valve with new cable strap.
6. Install intake cover assembly with four fasteners and
nylon washers. Tighten fasteners to 12-36 in-lbs (1.3-
4 Nm).
1
WARNING
1
WARNING
After installing seat, pull upward on front of seat to be
sure it is in locked position. While riding, a loose seat can
shift causing loss of control, which could result in death
or serious injury. (00070a)
7. Install seat. See 2.45 SEAT .
Figure 1-44. Installed Air Cleaner Filter Element
12050
1. Filter element
2. Baseplate assembly
3. Air cleaner cover latch tabs (6)
4. Velocity stack
2
1
3
4