Buell 2007 ULYSSES, Service Manual, Page: 229 / 647

2-100 2007 Buell Ulysses: Chassis
HOME
WINDSHIELD AND WINDSCREEN 2.44
REMOVAL
NOTES
●
The windshield releases from the windscreen by pulling
outward and away from vehicle.
● The windscreen fastens into the left and right front mod-
ules (2, 8) and the center fairing support (6).
1. See Figure 2-133. Remove windshield (4) by pulling
loose from windscreen (6).
2. Remove six windscreen fasteners (5).
3. Remove windscreen (6).
INSTALLATION
1. See Figure 2-133. Position windscreen (6) onto left and
right front modules (2, 8) and the center fairing support
(6).
2. Install six fasteners and tighten to 10-12 in-lbs (1.1-1.4
Nm).
3. Install windscreen (4) by pushing into place. Pull on
windscreen when installed to verify attachment.
Figure 2-133. Windshield and Windscreen
1. Headlight mounting bracket
2. Left front module
3. Windscreen fastener (4)
4. Windshield
5. Windscreen fasteners (6)
6. Windscreen
7. Fairing support, center
8. Right front module
1
2
3
4
6
7
8
b1198a7x
5