Buell 2007 ULYSSES, Service Manual, Page: 622 / 647

2007 Buell Ulysses: Electrical 7-59
HOME
INSTALLATION
1. See Figure 7-71. Place instrument module (1) into posi-
tion in front support module (2).
2. Install washers (4) and fasteners (5). Tighten fasteners to
12-36 in-lbs (1.4-4.1 Nm).
3. See Figure 7-70. Connect instrument module connector
[39].
4. Install windshield and windscreen. See 2.44 WIND-
SHIELD AND WINDSCREEN .
5. Install negative battery cable.
1
WARNING
1
WARNING
After installing seat, pull upward on front of seat to be
sure it is in locked position. While riding, a loose seat can
shift causing loss of control, which could result in death
or serious injury. (00070a)
6. Install seat. See 2.45 SEAT.
Figure 7-70. Instrument Module Connector [39]
11930b
Figure 7-71. Instrument Module
b1200x7x
1
6
4
5
1. Instrument module
2. Fairing support, center
3. Grommet (3)
4. Washer (2)
5. Fastener (3)
6. Front support module, left and right
7. Instrument module connector [39]
6
3
7
2