Buchi DuMaster D-480 Operation Manual Download Page 18

Page: 18 / 354

Operating instructions DuMaster D-480

©BÜCHI Labortechnik AG

2 - Basic security settings

Working with the operating instructions

Operating the analyzer

Read the operating instructions thoroughly before performing work with the analyzer.

Storing the operating instructions

Store the operating instructions carefully and make sure the instructions are accessible for all relevant

personnel.

Passing on the operating instructions

If you pass on the analyzer, always pass on the operating instructions, too.

Representation of safety instructions

Safety signs

This is a safety sign. Instructions with this sign contain warnings about risks of injury and even death.

These instructions must always be observed in order to avoid risks.

Risk levels

The safety instructions are categorized according to the following risk levels:

Risk level

Consequences

Probability

Risk

Death / serious injury (irreversible)

high

Warning

Death / serious injury (irreversible)

medium

Caution

Minor injury (reversible)

medium

Caution

Damage to property

possibly

Instructions for disposal of consumables

Rules

Observe the following rules for disposal of consumables:



Dispose of the consumables according to the relevant disposal categories.

Summary of Contents for DuMaster D-480



































































































































































































































































































































































Search results

Summary of Contents for DuMaster D-480

Reviews:

Related manuals for DuMaster D-480

Brands by name

Popular brands

Buchi DuMaster D-480, Operation Manual

Search results

Summary of Contents for DuMaster D-480

Reviews:

Related manuals for DuMaster D-480

Brands by name

Popular brands