Buchi DuMaster D-480 Operation Manual Download Page 205

Page: 205 / 354

Operating instructions DuMaster D-480

©BÜCHI Labortechnik AG

8 - Maintaining the instrument

205



Once the furnaces are stable, perform a leak test. See Performing a leak test.



The instrument is only ready to measure when the leak test is successful.

To be observed after maintenance

If you have performed maintenance work that has a defined maintenance interval, you must manually

reset the "Status" field to zero on the "Maintenance intervals" dialog (accessible via

Options >

Maintenance > Intervals

. See Defining maintenance intervals in the software.

Summary of Contents for DuMaster D-480



































































































































































































































































































































































Search results

Summary of Contents for DuMaster D-480

Reviews:

Buchi DuMaster D-480, Operation Manual, Page: 205 / 354

Search results

Summary of Contents for DuMaster D-480

Reviews: