48
| English
2 609 141 101 • 23.7.13
The measuring tool monitors the
correct function for each measure-
ment. When a defect is determined,
only the symbol shown aside flashes
in the display. In this case, or when
the above mentioned corrective
measures cannot correct an error, have your dealer
forward the measuring tool to the BTI after-sales
service.
Maintenance and Service
Maintenance and Cleaning
Store and transport the measuring tool only in the
supplied protective pouch.
Keep the measuring tool clean at all times.
Do not immerse the measuring tool in water or oth-
er fluids.
Wipe off debris using a moist and soft cloth. Do not
use any cleaning agents or solvents.
Maintain the reception lens
17
in particular, with
the same care as required for eye glasses or the
lens of a camera.
In all correspondence and spare parts orders,
please always include the 7-digit order number giv-
en on the nameplate of the machine.
In case of repairs, send in the measuring tool
packed in its protective pouch
23
.
Disposal
Measuring tools, accessories and packaging
should be sorted for environmental-friendly recy-
cling.
Do not dispose of measuring tools into household
waste!
Only for EC countries:
According to the European Guide-
line 2012/19/EU, measuring tools
that are no longer usable, and ac-
cording to the European Guideline
2006/66/EC, defective or used bat-
tery packs/batteries, must be col-
lected separately and disposed of in an environ-
mentally correct manner.
Battery packs/batteries:
Integrated batteries may only be removed for
disposal.
Opening the housing shell can dam-
age or destroy the measuring tool.
Completely discharge the battery. Unscrew all
screws from the housing and open the housing
shell. Disconnect the battery connections and re-
move the battery.
Do not dispose of battery
packs/batteries into household
waste, fire or water. Battery
packs/batteries should, if possi-
ble, be discharged, collected,
recycled or disposed of in an en-
vironmental-friendly manner.
Subject to change without notice.
The laser beam outlet
16
or
the reception lens
17
are
covered.
Make sure that the
laser beam outlet
16
or the reception
lens
17
are unob-
structed
Wrong reference level set
Select reference
level that corre-
sponds to measure-
ment
Obstruction in path of laser
beam
Laser point must be
completely on tar-
get surface.
The indication remains unchanged or the meas-
uring tool reacts unexpected after pressing a
button
Software error
Press the measuring
button
2
and the but-
ton for clearing the
internal memory /
On/Off
8
to reset the
software.
Cause
Corrective
Measure
OBJ_BUCH-1840-002.book Page 48 Tuesday, July 23, 2013 3:52 PM
