![BT IMAGE 350 User Manual Download Page 15](http://html.mh-extra.com/html/bt/image-350/image-350_user-manual_2824372015.webp)
15
Setting up
10 Setting the date and time
The display shows the time when your Image
350 is in standby mode. Your Image 350 can
also print the date and time at the top of each
fax it sends.
To set the date and time
•
Press the
SET UP
button; display
shows
SET RESOLUTION
.
•
Press the
§
or
©
buttons until the display
shows
USER SET-UP
.
•
Press the
button; display shows
LINE SET-UP
.
•
Press the
§
or
©
buttons until the display
shows
USER DATA
.
•
Press the
button; display shows
SENDER ID
.
•
Press the
§
or
©
buttons until the display
shows
SET DATE/TIME
.
•
Press the
button; display shows the
currently set date and time.
•
Using the keypad enter the new date and
time setting. After each digit is entered the
cursor will automatically move on to the next
digit space.
SET UP
•
When the correct date and time is shown in
the display press the
button to confirm
the new setting. The display shows
USER
DATA
.
•
Press the
STOP
button twice to return to
standby mode.
Use the
©
button to move forward through
the display.
Use the
§
button to delete characters.
If you pause for more than one minute when
entering your ID name, number and call back
number,your Image 350 will revert to standby
mode and the changes will not be saved.
Your
Image
350 displays the date and time in the
following order:
DayDay/MonthMonth/
YearYear HourHour:MinuteMinute
using the
24-hour clock for the time. For example, to set 25
minutes past 4 in the afternoon on 20 February
1997 enter:
20/02/97 16:25
.