register
6
RSH-EC_Cap_4_en
Rev. 1.0 - 02/2012
4
Warnings and safety instructions
4.1 General information
This operating manual defines proceeding methods for
• proper installation and commissioning,
• safe operation,
• customer-provided service as well as
• dismantling and disposal
of the register sensor
RSH-EC
.
This operating manual also applies to the following register sensor
variants:
• 1- and 2-channel version (housing openings not required on
the 1-channel version are sealed by locking plates)
• Optical waveguide lengths in 3.2 m and 5.0 m
• Axial and angular head version of the optical waveguide
• Versions with one or two interfaces for the use of an external
sensor (
RSH-EC-E
,
RSH-EC-EE
,
RSH-EC-FE
,
RSH-EC-EF
and
RSH-EC-CS
).
Important
: If you use one of these five variants, please
continue with reading appendix A of this operating manual
first!
Reading this operating manual attentively is indispensable for safe,
effective and fault free operation. Particularly ensure that the sections
qualified personnel and intended use are adhered to.
4.2 Qualified personnel
Only allow qualified personnel to install, operate and particularly carry
out service work on the register sensor. For the purpose of this docu-
mentation these are persons who:
• are familiar with the general safety regulations,
• are trained to handle electrical units,
• are trained by the owner/user based on the ATEX EC directives
94/9/EG and 99/92/EG,
• have familiarised themselves with this operating manual.
