BST RSH-EC, Operating Manual

Page: 11 / 41

register
RSH-EC_Cap_4_en
Rev. 1.0 - 02/2012
8
• The application locations are partly explosive areas on printing
presses:
• The optical register sensor components (optical waveguide
and lenses) are approved for use in explosive areas. These
components comply with the housing category 2G and are
thus approved for being operated in zone 1.
• The housing has no explosion protection approval and must
only be used outside of explosion protection zones.
• Ensure that installation, operation and service work are carried out
as described in the operating manual.
• Perfect and safe operation of the register sensor requires correct
transport, assembly and installation as well as careful operation and
correct maintenance and repair.
• In special individual cases adhere to the currently valid safety and
accident prevention regulations when operating this system.
• The register sensor described in the operating manual has been
developed, manufactured, tested and documented on the basis of
the currently valid safety standards. For this reason, under normal
circumstances no danger to health or damage to assets can result.
• Only use original BST eltromat spare parts when carrying out service
work. Only this will ensure that function safety is maintained and the
limit values relevant for explosion protection are met (radiation at
the lens system opening).
• Unauthorised modifications (mechanical / electrical) are expressively
forbidden. The warranty will automatically become null and void if
the register sensor is modified in any way.
• The optical waveguides are sensitive, optical components. Never
expose the optical waveguides to mechanical stress (e.g. pulling,
bending, crushing or twisting).
4.5 Designation
• The type plate clearly identify the system ( see chapter 1.2
TYPE PLATES).
• ATEX identification ( see chapter 1 ATEX IDENTIFICATION
AND TYPE PLATES).
• Refer to the EC Conformity Declaration for the CE symbol of identi-
fication
(
see chapter 2 EC DECLARATION OF CONFORMITY).
• System manufacturer:
BST eltromat International
GmbH
Heidsieker Heide 53
D-33
739 Bielefeld