register
30
RSH-EC_Cap_14_en
Rev. 1.0 - 02/2012
14
Error diagnosis with the aid of the status LEDs
Review
The register sensor is equipped with eight status LEDs, which light up
to signal the condition of the register sensor. This ensures a rapid and
reliable error diagnosis. The status LEDs are subdivided into two groups:
Network LEDs
(
see chapter 14.1 NETWORK LEDS)
Error and status LEDs
(
see chapter 14.2 ERROR AND STATUS LEDS)
Fig. 14.1
14.1 Network LEDs
Bus input X1 and bus output X2 of the register sensor are each equipped
with two status LEDs, indicating the network status. The two status LEDs
LINK and ACT always light up simultaneously. The following table
contains descriptions of these status LEDS and their display states.
