register
RSH-EC_Cap_4_en
Rev. 1.0 - 02/2012
9
4.6 Inadmissible use
Any use other than that specified under intended use is considered as
inadmissible (
see chapter 4.4 INTENDED USE).
The warranty concerning function and protection type will become null
and void when the register sensor is used in another manner than that
intended. The manufacturer will not assume any liability for possible
damage resulting from inadmissible use.
• Do not install the housing in explosion protection zones.
• Do not open the lens system in explosion protection zones when the
register controller is switched on.
• Do not operate the register controller with a damaged optical wa-
veguide because electrical leakage cannot be ensured.
• Ensure that no absorptive substances (e.g. dust) enter the lens
system. When switched on, the high light performance can ignite
these substances. Ensure absolute cleanliness during replacement
work on the lens system!
• Do not switch on the register controller unless the equipotential
bonding (grounding) on the housing is connected.
• Immediately replace the lens system by an original lens system in
the event of mechanical damage.
• The register sensor is not suitable for lighting purposes.
• Never use an optical waveguide for fastening purposes.
• Never step on the housing or use it as a tool.
4.7 Structure of the safety instructions
The safety instructions in this operating manual are of a uniform structure
in accordance with the following examples.
Signal word!
Information text
• The pictograph indicates the type of danger.
• The signal word indicates the severity of the danger.
• The information text describes the individual danger and provides
instructions of how to avoid danger.
