Design and function
Verti-Mix 951-1651, Verti-Mix 951 L-1251 L, Verti-Mix 1501 D-2401 D 10.13
59
5.1.7
Work lights
Switch the work lights off when travelling on roads.
Optional extra
The work light (1) illuminates the area behind the
fodder mixing wagon. It is operated via the
electro-hydraulic easy-to-use control set.
Fig. 28
5.2
Cutting knives of mixing auger(s))
In the mixing container, the cutting knives (1) of
the mixing auger(s) (2) chop and mix the fodder
components filled in. The number of cutting
knives mounted on a mixing auger depends on
the diameter and the height of the mixing auger.
Additional scrapers (5) mounted opposite the
front auger end of the respective mixing augers
ensure a uniform discharge of the mixed fodder
components.
The cutting knives (1) may be screwed onto the
mixing auger in a retracted position (3)
(standard) and in an extended position (4).
Adjustment of the cutting knives permits to
individually adapt the mixing system to the
operating conditions and the structure of the
fodder components to be mixed. Observe the
information in the chapter "Set cutting knives of
mixing auger", page 59
Fig. 29
