Operation
Verti-Mix 951-1651, Verti-Mix 951 L-1251 L, Verti-Mix 1501 D-2401 D 10.13
101
6
Operation
Depending on the machine’s equipment, actuation of the machine’s hydraulic and electrical function(s)
is effected via remote control from the tractor:
via direct tractor connection (standard equipment),
via Bowden cable operation (optional extra),
via electro-hydraulic operation (control set) (optional extra).
The actuating speed of the hydraulic functions (hydraulic
components) depends on the tractor's hydraulic system.
Depending on the tractor model, a correction of the set actuating
speeds at the tractor's control device / the machine's control
block may be necessary.
For information about the required control devices, please refer
to the chapter "Required tractor equipment“ on page 28.
6.1
Direct tractor connection
The individual hydraulic components of the
machine are directly connected to the hydraulic
system of the tractor via appropriate hydraulic
hose pipes for oil supply.
A double-acting control device is required on the
tractor for each function (hydraulic component) of
the machine.
Each individual function of the machine is then
actuated from the tractor via the operating
element on the appropriate control device.
Fig. 84
