Use of machine
134
Verti-Mix 951-1651, Verti-Mix 951 L-1251 L, Verti-Mix 1501 D-2401 D 10.13
Remove baler twines and nets on the ground before filling round
or cuboid bales into the mixing container by means of the
loading tool.
When filling the mixing container, ensure that the tractor engine
runs as equally as possible when powering the mixing auger,
i. e. without variations in the tractor engine speed. Variations in
the tractor engine speed indicate insufficient engine power of
your tractor and cause additional load to all powered
components.
The required tractor power can be reduced by means of a two-
level switchgear (optional extra) in the power train of the mixing
auger.
·
The total fodder quantity that can be mixed and chopped in one
mixing container filling cycle depends on the following factors:
mixing container capacity,
total dry mass of the fodder components to be mixed,
structure (stalk length and quality) of the individual fodder
components,
way and order of filling,
tractor power.
Due to the different fodder components to be mixed, the filling
quantity for one mixing container filling cycle may vary. Avoid
overloading of the fodder mixing wagon when filling the mixing
container. In case of overload:
the individual fodder components cannot be mixed
homogeneously,
mechanical damage on the power train may occur,
cutting knives of the mixing auger may be bent.
If only one tractor is available, the mixing container can also be
filled when unhitched. The mixing process will, however, be
accelerated if the mixing auger is powered during filling.
If the mixing auger is switched on only after filling or transport
journeys, more power will be required to set the fodder
components to be mixed in motion.
