Safety instructions
32
Verti-Mix 951-1651, Verti-Mix 951 L-1251 L, Verti-Mix 1501 D-2401 D 10.13
professional training and the knowledge of the relevant provisions, they are able to assess the
tasks assigned to them and to identify possible risks.
Please note: A qualification which is equivalent to professional training may also be acquired by
several years of practice in the corresponding field of work.
3.3
Product safety
3.3.1
Safety-conscious operation of machine
The machine is only allowed to be operated from the driver’s seat of the tractor, provided that no
people are within the machine’s hazardous area. Observe the information in the chapter "Hazardous
areas and dangerous spots", page 17.
3.3.2
Safety and protective devices
Only operate the machine when all safety and protective devices are properly fixed and in fully
operable condition.
Defective or removed safety and protective devices might cause dangerous situations.
Check all safety and protective devices for visible damage and functional ability before starting
the machine.
3.3.3
Structural alterations
Vehicles provided with an official operating license or vehicle-linked devices and equipment
provided with an official operating license or a road traffic license according to the road traffic
regulations must be in the condition specified by that license.
You are only allowed to carry out structural alterations, extensions or modifications on the
machine with the prior written consent of the manufacturer.
In case of non-authorized structural alterations, extensions or modifications:
the declaration of conformity and the CE symbol of the machine will become invalid,
the operating license according to national and international regulations will become invalid.
Exclusively use original parts or modification and accessory parts approved by the manufacturer
such that:
the declaration of conformity and the CE symbol of the machine will remain unaffected,
the operating license according to national and international regulations will remain
unaffected,
perfect functioning of the machine will be ensured.
The manufacturer will not assume any liability for damage resulting from:
unauthorized alterations of the machine,
non-approved modification and accessory parts,
welding and drilling work on load-bearing parts of the machine.
3.3.4
Spare and wearing parts, auxiliary materials
Immediately replace machine parts which are not in perfect condition.
Exclusively use original parts of the manufacturer or parts approved by the manufacturer such that the
operating license according to national and international regulations will remain unaffected. If spare
and wearing parts produced by third-party manufacturers are used, their stress-related and safety-
conscious design and production will not be ensured.
