Use of machine
Verti-Mix 951-1651, Verti-Mix 951 L-1251 L, Verti-Mix 1501 D-2401 D 10.13
133
10.1
Fill fodder mixing wagon
WARNING
Risk due to incorrect use of the tractor if this causes failure of
components, insufficient stability and insufficient steerability
and braking ability of the tractor!
Observe the maximum loading capacity of the attached / hitched
machine and the admissible axle and tongue loads of the tractor. Run
the machine only with partly-filled mixing container, if necessary.
CAUTION
Risk of breakdown of components due to overloading of the
machine!
Observe the maximum load of the machine and the filling order of the
individual fodder components.
The fodder components should freely move in the mixing container
with the mixing auger(s) powered. Overloading may occur if fodder
components become entangled by the counter-cutters and blockages
pile up.
Overloading affects the machine’s performance and service life.
Damages due to overloading are excluded from warranty.
WARNING
Risk of crushing, cuts, becoming entangled or being drawn in if
people get into accidental contact with the powered mixing
auger due to improper filling of the mixing container!
Only use appropriate equipment to fill the mixing container.
Appropriate equipment may be:
tractor equipped with front loader,
telescopic loader,
wheeled / yard loader.
People are only allowed to fill the mixing container manually if
they cannot accidentally fall into the mixing container.
People are not allowed on a level with or above the feed
opening of the mixing container.
As a basic principle, fill pourable fodder additives (e. g. mineral
feed) into the mixing container by means of the loading tool
(loading shovel) or through the feed funnel (optional extra).
Fill liquid or sticky fodder additives into the mixing container by
means of the loading tool (loading shovel).
Fill the loading shovel only partly.
Form a hollow in the grass or maize silage.
Fill the fodder additives into the hollow.
